Automatic Pull-Off Adhesion Tester

Name: Automatic Pull-Off Adhesion Tester
Brand: CALTECH ENGINEERING SERVICES
Price: 50 INR
Availability: InStock

Price 50 INR/ Piece

Get a Price/Quote

MOQ : 50 Pieces

Automatic Pull-Off Adhesion Tester Specification

Capacity
Up to 20 MPa

Temperature Range
0C to 50C

Connectivity Type
USB for Data Transfer

Measurement Range
0 20 MPa

Frequency
50 Hz

Resolution
0.01 MPa

Diameter
50 mm

Protection
IP54 Rated Enclosure

Application Media
Paint, Coating Adhesion

Pressure Range
0 to 20 MPa

Sensor Type
Load Cell

Equipment Type
Automatic Pull-Off Adhesion Tester

Humidity %
Up to 85% RH

Material
Aluminium/Steel Construction

Power Supply
230V AC, 50Hz

Power Consumption
30 W

Accuracy
1% of full scale

Display Type
Digital LCD Display

Range
0 to 20 MPa

Automatic Pull-Off Adhesion Tester Trade Information

Minimum Order Quantity
50 Pieces

Main Export Market(s)
Central America, North America, South America, Eastern Europe, Middle East, Western Europe, Africa, Asia, Australia

Main Domestic Market
All India

About Automatic Pull-Off Adhesion Tester

Caltech India offers Automatic Digital Pull-off Adhesion Tester. There are currently three main methods for testing the adhesion of a coating to a substrate: cycling, cross-hatch, and pull-off. Both cycling and cross-hatch can only evaluate the grate of adhesion, but cannot quantify the results. The pull-off method can quantitatively describe the specific size of the adhesion, and it is clear to evaluate the adhesion of different coatings, which is very suitable for formulation developers.

BGD 500/S Automatic Digital Pull-off Adhesion Tester is a new intelligent adhesion testing instrument. It hydraulically tests the coating of a specific area. The whole process of pull-off is automatically performed by the instrument. Therefore, the pull-off speed is stable and controllable, avoiding the error caused by manual pressurization; the pull-off force can be accurately displayed by the digital display, and there are two different units of MPa and psi to be selected; the upper limit of pressurization can be set; after reaching the set pressure, the dwell time can be set to evaluate the durability of the sample under a certain pressure.

The instrument meets the requirements of ASTM D4541/D7234, ISO 4624/16276-1, etc. It is the first automatic pull-off tester in China and has the characteristics of simple operation, accurate data, low maintenance cost and low cost of supporting consumables. Adhesion testing between different coatings in some concrete base coats, anti-corrosion coatings or multi-coat systems.

Efficient Adhesion Testing

Designed for ease of use, the Automatic Pull-Off Adhesion Tester enables thorough and repeatable adhesion measurements. Its battery backup allows uninterrupted field and laboratory operation, while the touch keypad and digital display simplify test configuration. The instrument supports both automatic and manual modes, ensuring flexibility for different test requirements.

Reliable Data Management and Compliance

With onboard storage for up to 100 results and Windows-compatible data analysis software, this tester meets ASTM D4541 and ISO 4624 standards. USB connectivity enables swift data transfer, making report generation and compliance documentation straightforward. The factory calibration and supplied certificate ensure every reading is accurate and reliable.

Robust Design for Field and Lab Use

Engineered with durable aluminium/steel construction and an IP54 rated enclosure, the tester withstands harsh environments. Compact and lightweight at approximately 4.5 kg, it is easily transported in its carrying case. Accessories, including adhesion dollies and charger, provide everything needed to start testing immediately.

FAQs of Automatic Pull-Off Adhesion Tester:

Q: How does the Automatic Pull-Off Adhesion Tester measure coating adhesion?

A: The device applies a controlled force to an adhesion dolly bonded to the coated surface, then automatically or manually increases the load until the coating detaches. The maximum force recorded quantifies the adhesion strength.

Q: What standards does this adhesion tester comply with?

A: This tester meets ASTM D4541 and ISO 4624 standards for pull-off adhesion testing, ensuring results are recognized and accepted internationally.

Q: When should I use the battery backup feature?

A: The battery backup is ideal for fieldwork or situations with limited access to power outlets. It provides up to six hours of operation, ensuring uninterrupted testing in remote locations or during power outages.

Q: What types of coatings and surfaces can be tested with this instrument?

A: The tester is equipped to assess adhesion strength for various paints, coatings, and protective layers applied on metals, concrete, and other substrates within its specified measurement range.

Q: Where can I access the stored measurement data?

A: Stored measurements can be retrieved directly from the instruments onboard memory or transferred to a Windows computer using the USB port for further analysis and report generation.

Q: What is the process for calibrating this tester?

A: Each tester is factory calibrated and comes with a calibration certificate. Periodic calibration can be performed by authorized service providers to maintain accuracy over its lifecycle.

Q: What are the main benefits of using this equipment in testing applications?

A: Key benefits include precise, repeatable measurements, compliance with international standards, portable operation, robust construction, comprehensive data management, and user-friendly interface, streamlining quality assurance for paint and coating adhesion.

Tell us about your requirement